Heavy duty roller conveyor
Construction:
- Available in 3" and 4" structural steel channel
- Side frames are in standard 10 ft. lengths, other lengths available upon request
- Each 10 ft. section contains 3 welded cross members
Height:
- 12" floor to top of roller standard
- Other heights available upon request
Clearance: Roller height 1/2'' above side frames
| Width | |||||
| 18" | 24" | 30" | 36" | 42" | 48" |
| Other widths available upon request |
Rollers:
- Tube is "Swedged" over bearing, no sharp edges
- 2-1/2" diameter x 11 gauge roller
- Same load rating as 10 gauge
- Available in 5/8" and 11/16" hex shaft, spring-loaded
- 750 lbs. per roller
Support legs:
- 5 ft. on center
- 3" structural steel channel
Bearings:
- Hardened steel raceways
- Broached inner race
- 11- 3/8" diameter hardened steel balls
- Pressed steel shell with teflon seals
- High temperature, waterproof lubricant for smooth performance
- The outer seal will "trap" foreign matter to prevent entry into the bearing
Back to Systems.