Non-Power Roller Conveyor (NP)

Heavy duty roller conveyor

Construction:

  • Available in 3'' and 4'' structural steel channel
  • Side frames are in standard 10 ft. lengths, other lengths available upon request
  • Each 10 ft. section contains 3 welded cross members

Height:

  • 12'' floor to top of roller standard
  • Other heights available upon request

Clearance: Roller height 1/2'' above side frames

chain-driven live roller conveyor

Rollers:

  • Tube is "Swedged" over bearing, no sharp edges
  • 2-1/2'' diameter x 11 gauge roller
  • Same load rating as 10 gauge
  • Available in 5/8'' and 11/16'' hex shaft, spring-loaded
  • 750 lbs. per roller

Support legs:

  • 5 ft. on center
  • 3'' structural steel channel

Bearings:

  • Hardened steel raceways
  • Broached inner race
  • 11- 3/8 '' diameter hardened steel balls
  • Pressed steel shell with teflon seals
  • High temperature, waterproof lubricant for smooth performance
  • The outer seal will "trap" foreign matter to prevent entry into the bearing